Technical Overview
2.5
Oven Model Configuration
The manual test procedure must be completed and confirmed as per the instructions in this section.
At every POWER-UP, the control runs a latch auto-test cycle.
The lock icon flashes while the latch is
moving.
1.
Hold [
B
&
G
] keys for about 5 seconds until all the display elements turn on.
2.
After few seconds the displays turn OFF and the central one shows the indication
“t1”
to
indicate that the key [
A
] should be pressed. If the key works correctly the light sound “tick”
occurs.
3.
Proceed to the next step until the last key [
H
].
“t-1, t-2, t-3, …, t-8.
4.
At this time appears the model selected (MH02 default). If necessary to change the model to
match it to the oven, press keys [
D
]/[
E
] that correspond to -/+ keys.
5.
Than press [
H
] key to confirm the choice.
The model is set by connector (see picture 2) that must be placed in the same location in
case of control substitution.
er
ons
Model
PR00
PR01
PR02
PR03
PR04
PR05
PR06
PR07
PR08
PR09
PR10
PR11
P
MH01
ECO
MH02
Fig 1