Component replacement and adjustment
procedure
7.4
Convection fan motor substitution
1.
Disconnect the power supply cord
and remove the Oven from the
cabinet.
2.
Remove the rear covers.
3.
Disassemble the baffle by removing
the four screws in the cavity.
4.
Remove the fan blade by using a
10mm socket, than remove 3
screws in the cavity.
5.
Disconnect the terminals on the fan
in the rear side.
6.
Remove the four screws on the
motor holder and remove it. Than to
remove the motor from the holder
use a 12mm socket.
7.
Mount the new fan motor on the
holder and attach it with the screws
and spacers.
8.
Attach the screws on the motor in
the cavity and then mount the fan
blade.
9.
Replace the baffle.
10.
Connect the terminals.
11.
The connections must not be loose.
12.
Reinstall the Oven into the cabinet.
13.
Reconnect the power supply cord
after the Oven is installed.
14.
Run the Oven and check all
functions.
