Component replacement and adjustment
procedure
7.2
Cooling fan motor substitution
1.
Disconnect the power supply cord
and remove the Oven from the
cabinet.
2.
Remove the upper cover.
3.
Remove the screws on the
attachment bar (four lateral & three
on the top) [IF PRESENT].
4.
Disconnect the terminals on the fan.
5.
Remove the four screws on the fan
and remove the fan.
6.
During mounting of the new cooling
fan motor, you must only use the
holes shown in Figure A.
7.
Attach the trim bar with the screws
and connect the terminals.
8.
The connections must not be loose.
9.
Reinstall the Oven into the cabinet.
10.
Reconnect the power supply cord
after the Oven is installed.
11.
Run the Oven and check all functions.
