Component replacement and adjustment
procedure
7.6
Upper element substitution
1.
Disconnect the power supply cord
and remove the Oven from the
cabinet.
2.
Remove the rear covers.
3.
Disconnect the terminals of
heating element.
4.
Remove the two screws near the
external terminals, one of which is
used for ground.
5.
Remove the upper element by
removing two screws on the
brackets on top in the cavity.
6.
Mount the new upper element with
a new fiber gasket between the
base of the element and the back
side of the Oven.
7.
Connect the terminals. Pay
attention to the sequence of wiring
on the element
8.
The connections must not be
loose.
9.
Reinstall the Oven into the
cabinet.
10.
Reconnect the power supply cord
after the Oven is installed.
11.
Run the Oven and check all
functions.
