Technical Overview
2.8
Fault Numbers
Faults
N°
Temperature sensor shorted.
E001
Electronic boards over temperature .
E004
Latch time-out overflow.
E008
Oven cavity overheating
E016
Temperature sensor disconnected or broken
E017
Wrong oven model configuration
E032
The control is continuously checking the status of the system. If an abnormal condition is detected for more
than 1 minute, a failure occurs:
The heaters and the other loads are disabled.
The display shows a “E” letter flashing, followed by a numeric code that depends on
the kind of failure.The control emits an acoustic warning signal that will last for some minutes.
To reset a failure declaration, first remove the cause of the failure then touch the [H] key (OFF).
