21
EN
Memory Function in Manual Mode
1
Press MANUAL/PAUSE button in edit page for 5 seconds, and release it. You can
record the last setting, There is ringing sound of bell for successful recording.
2 Press START button after above operation, machine back to work, and carry out the
input data.
3 Press STOP button, machine stop working.
4 Long press AUTO/PAUSE button in BLANK PAGE as below (display shown current
temperature only as below) for 5 seconds to restore factory settings, there’s a
slower ringing for restoring successfully.
MANUAL/PAUSE
TEMP
POWER
TIMER
Press START button. The machine starts working.
There is an „H“ flashing at the top left corner.
Press MANUAL/PAUSE during heating. Machine back to edit page. You can edit
TEMP, POWER, and TIMER. Press MANUAL button to confirm.
Press MANUAL/PAUSE button in edit page for 5 seconds, then relese it. You will hear
a ringing bell sound. It means you have recorded the data successfully.
Press MANUAL again, the
machine goes back to work.
Press STOP. The machine
stops working.
Blank Display
