Klark Teknik HELIX DN9340E Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 78

Klark Teknik HELIX DN9340E Скачать руководство пользователя страница 43

Setup Menu: DN9340E

33

7.10. Power-up Logo (Page 10)

The equaliser normally shows a logo page during power-up, including information such as software

version number.

To switch the logo on/off, turn the left control knob.

7.11. Ethernet Settings (Pages 11 and 12)

When controlling the DN9340E unit remotely via Ethernet, the unit requires an individual IP Address

and Subnet Mask to be set. For more information on DN9340E remote control set ups, see Section 8.

7.11.1

Ethernet IP Address (Page 11)

The IP Address may be set in one of three modes:

•

Manual – the IP Address is entered manually on each unit in the network using the DN9340E’s

front panel controls. This mode is ideal for direct unit to PC connections.

•

DHCP (Dynamic Host Configuration Protocol) – the IP Address is provided automatically by
the DHCP server in your network. This mode is recommended for large networks as it avoids

having to set IP Addresses manually on each unit.

•

Auto IP – this mode is provided for daisy chaining multiple units in a master/slave network.
Therefore, the IP Addresses are unimportant to the user and can be automatically configured

by the DN9340E and DN9344E units.

To check the current IP Address

1

With the DN9340E connected to your

network, step through the Set Up menus

to the Ethernet IP Network setup page
shown opposite.

2

Turn the left control knob and the unit

will scan the network to obtain the IP

address.

At the end of the scan, which takes a few seconds, the display updates with an IP address as shown

above. The Default IP Address is 192.168.1.1 in Manual mode.

«
...
41
42
43
44
45
...
»

Содержание HELIX DN9340E















































































Отзывы:

Нет отзывов