Klark Teknik HELIX DN9340E страница 3 Скачать руководство пользователя

Страница: 3 / 78

IMPORTANT SAFETY INSTRUCTIONS

These symbols are internationally accepted symbols that warn of potential hazards with electrical

products.

The lightning flash with arrowhead symbol within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “Dangerous voltage”

within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.

1. Read these instructions.

2. Keep these instructions.

3. Heed

all

warnings.

4. Follow

all

instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

14. Use the mains plug to disconnect the apparatus from the mains.

15. “WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE”

16. “DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE EQUIPMENT”

17. “THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE”

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE

AVIS:

RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR

Содержание HELIX DN9340E















































































Результаты поиска

Содержание HELIX DN9340E

Отзывы:

Похожие инструкции для HELIX DN9340E

Бренды по названию

Популярные бренды

Klark Teknik HELIX DN9340E, Руководство оператора

Результаты поиска

Содержание HELIX DN9340E

Отзывы:

Похожие инструкции для HELIX DN9340E

Бренды по названию

Популярные бренды