KitchenAid 2003 M, Техническое образование

Страница: 55 / 96

4-31
REMOVING THE WATER & ICE DISPENSER
1. Unplug refrigerator or disconnect power.
2. Remove the drip tray from the water & ice
dispenser.
Drip Tray
c) Bow the front panel out at the center
and remove it from the top and bottom
channels of the water & ice dispenser.
Bottom Channel
Top Channel
NOTE: There are two types of water and ice
dispensers: one for doors with panels, and the
other for stainless steel trimless doors. The
front panels for each type of door are removed
differently. Refer to step 3 for paneled doors, or
step 4 for stainless steel trimless doors, to
remove either type of front panel.
Continued on the next page.
3. For paneled doors:
a) Partially open the freezer door.
b) Remove the screws from the freezer
door handle and remove the handle.
d) Proceed to step 5 on the next page to
remove the dispenser.
4. For stainless steel trimless doors:
a) Position a wood block along the bottom
edge at the left corner of the water & ice
dispenser.
b) Use a rubber mallet, and hit the block
while you pull out at the bottom, so that
the tab releases the panel from the
dispenser housing.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Wood Block