13
NOTICE
NOTICE
When transporting a pallet on which NC rotary table is mounted, take
measures against over-turning or drop.
Transporting the pallet with NC rotary table mounted unstably may
cause the NC rotary table to overturn and then to drop from the pallet.
Disconnect electric cables and working fluid piping when relocating the
NC rotary table.
Relocating the NC rotary table with electric cables and working fluid
piping connected and hung down causes the NC rotary table to be
unstable or the worker to be tripped, resulting in unexpected accidents.
Electric cables or working fluid piping may be damaged during relocation,
and if the NC rotary table is installed on the machine again, unexpected
accidents may occur.
If electric cables and working fluid piping cannot be disconnected,
secure them to the NC rotary table.
Flush the working fluid piping sufficiently before connecting it to the NC
rotary table. If foreign matter enters the piping route, the product
capability may not be exhibited.
Be sure to use the NC rotary table body in a horizontal state.
If you use the NC rotary table body in an inclined state, hydraulic oil and
lubrication oil are not supplied to the proper levels respectively, resulting
in operation failure or reduction in the product life.
The following figures indicate the examples. If you intend to use the unit
in an inclined state, please contact your sales agent (M/C maker) or your
local distributor.
Horizontal state
Bad example
Bad example
CAUTION
CAUTION