KisanKraft
®
Warranty Certificate
(
CUSTOMER
C
OPY
)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: +91.80.22178200
Page 46 of 94
Lockup Positions
Locking bolt in the hooking connector
Locking bolt of the engine
Locking bolt for the support of the handle
Check the Pipelines and Electric Circuits
If an oil pipeline is found to be broken or a fitting is found to be loose, check if there is any leaking.
Check if the connectors in the electric circuits are in touch with other components and if they are
squeezed, damaged or loose. If oil pipes or electric connectors are found to be damaged, please
contact your dealer for repair or replacement. They must be replaced every 2 years even if they are
not damaged.
Note
: If the oil pipes are aged or damaged, fuel might leak out. Then a fire may break out if there is
a flame nearby. Make a careful check before and after operations and replace them as soon as
leakage is found.
Maintenance of the Battery
•
Before operation, check the liquid level in the
battery and make sure that it should be between
the upper and lower limits. (Refer diesel engine
manual).
•
If the liquid level in the battery is found insufficient,
please add a little distilled water.
•
In cold weather, if it is difficult to start the engine and the lights are found to be dim, please
recharge the battery.
•
If the machine is not operated for more than two weeks, the electricity in the battery may
discharge. In such a case it would be difficult to start the engine. You would have to
recharge the battery or start the engine manually.
•
If the machine is not used for a long period of time, it is advisable to recharge the battery
at least once a month. This will help to prolong the service life of the battery.
