KisanKraft
®
Warranty Certificate
(
CUSTOMER
C
OPY
)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: +91.80.22178200
Page 43 of 94
Adjustment and Maintenance of Different Units
Water removal and clearing of the fuel tank
Water might be accumulated in the fuel tank
because the fuel is pure enough. It will cause
contamination. Remove it with the following method.
•
Loosen the oil discharge plug at the
exhaust port slowly with a 17” spanner. It
is better to drain the accumulated dirty
water little by little.
•
When the dirty water is completely
drained tighten the oil discharge plug.
Check and replacement of the fuse
Fuses, which will melt and break at high
temperature, are components protecting electric
circuits from overload.
•
Open the front cover.
•
A fuse socket can be found at the top front
of the engine. If the fuse is found broken,
it must be replaced.
Adjustment with flexible wire adjusters for various controls:
Turning switch over device controlling the manual handle.
Take out the flexible wire adjuster in the steering
handle. Adjust the clearance of the flexible wire
adjuster of the gearbox right by the handle. After the
clearance gets to zero, adjust the flexible wire
adjuster for the steering handle.
Steering Handle
Check: Take hold of the steering handle and check
that the clutch is in the state of disengagement. In
such a case, you can easily press down the steering
handle.
Adjustment: When the steering handle is 10 mm
(dimension A) from the handle of the machine, clutch
is disengaged. Adjust with the flexible wire adjuster
on the steering handle.
In a natural state (i.e. without taking hold the steering
handle), the clearance should be 1-3mm (dimension
B).
