KisanKraft
®
Warranty Certificate
(
CUSTOMER
C
OPY
)
This warranty is null & void, if you fail to register the warranty with KisanKraft
by sending the KisanKraft Copy with dealer’s stamp.
: +91.80.22178200
Page 10 of 94
Cautions That Must Be Taken Before Operating This Machine
:
Refilling can be done only after the engine has cooled down.
Smoking must be prohibited and flame must not be brought
near, in the process of refilling. Violation of this rule might
lead to serious fire.
During winter time, when the machine is to be started
indoors, good ventilation must be maintained, as there is a
chance for contaminated air affecting health or may lead to
poisoning.
Every day before starting the machine, care must be taken
to remove the weeds or debris that get caught around the
muffler or engine, because they might lead to overheat and
damage the machine. At the same time, all covers or caps
must be checked carefully to make sure that they are kept
tight and free from debris.
Every day, before operation, the machine, must be checked
carefully to see if the clutch control levers and other controls
can move freely. Adjustment must be made if they cannot be
operated safely and reliably. Otherwise, mechanical faults or
accidents might occur.
2. Cautions in the Process of Loading and Unloading
The steering handles or the main clutch control lever
must never be operated when the machine is
running on a stepping board
.
At the time of using the machine to load and
unload with the help of a stepping board, it must be
operated at the lowest speed. The operator must not
take a turning, or change the route or stop on the
board. Operation of the steering handles and main
clutch control lever must not be put in the “neutral”
(idle) position. Stop the machine immediately
should any emergency occur. Otherwise accidents
such as falling down might happen.
