KisanKraft
®
Warranty Certificate
(
CUSTOMER
C
OPY
)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: +91.80.22178200
Page 45 of 94
Put the control lever in the “disengagement” position
and check if the intercultivator stops rotating
Method of Adjustment:
•
Adjust with the flexible wire adjuster so
that it is possible to practice reliable
control over the engagement and
disengagement upon the rotation of the
intercultivator.
•
Put the intercultivator clutch control lever
in the position of disengagement and stop
the engine. Rotate slowly with your hand
the rotary claws on the intercultivator and
check if they can move freely.
Auxiliary Speed Change Control Lever
Check if it is possible to switch reliably between the
positions of “high” and “low”
Method of Adjustment
Put the auxiliary speed change control lever in the
“high” position and adjust with the help of the flexible
wire adjuster, the clearance between the auxiliary
speed control lever and the end of the speed control
yoke shaft to about zero.
At the position of “high”, it should be impossible to
push the auxiliary speed control lever into the speed
control yoke shaft. Please check this point carefully.
Adjustment of the Tire Pressure:
The pressure in the right and left tires should be
adjusted to 1.2kg/cm
2
.
If the pressure settings in the right and left tires are
not equal, it would be very difficult to control the
handle and drive in a straight line in operations.
