2-Stroke Petrol Engine
: www.kisankraft.com
: +91.80.22178200
Page 48 of 56
2.
Turn the engine switch to the “OFF” position.
(Switch position may vary depending on the
specifications. Refer to the instruction manual of
driven equipment.)
In chase of a push button type switch, keep
pressing the push button till the engine stops
completely.
Replenish the fuel before using up
completely. It will make easier at the next
starting.
When there is no subsequent work, drain the
fuel from the fuel tank and restart the engine
to use up the fuel remaining in the carburetor.
CAUTION
Place the engine at a horizontal position
when the driven equipment is not used at
the rest time, or others, in summer season.
(If the tank is tilted as much as the inside
of fuel cap is submerged in the fuel, the
fuel may leak.)
Do not touch the engine body, especially
the muffler, during or immediately after
stopping the operation.
(There is risk of burn.)
PRECAUTIONS DURING OPERATION
After starting the engine, set
the throttle lever at the slow
speed position and warm up
the engine for approx. 2~3
minute. As the engine worms
up, the engine will be
accelerated smoothly.
Do not attempt to raise the engine speed abruptly immediately after the start
because the lubrication oil may not be distributed yet all over the engine.
If the throttle lever is turned to the fully opened position, the revolution speed
picks up to a considerably higher level, which could not only shorten the life of
engine but also cause trouble. It should be avoided to race the engine at high
speed under no load condition or raise the speed unnecessarily.
Before starting operation, make sure to inspect the engine in accordance with the
“Inspection before starting the engine”.
Do not operate the engine at the indoor or a place with poor ventilation. (Exhaust
gas contains odorless and harmful carbon monoxide.)
Do not insert in or approach hands or foot at the moving or rotating sections.
