Pole Pruner/ Palm Harvester
KK-PP2-8627/ KK-PH2-215
: www.kisankraft.com
: +91.80.22178200
Page 13 of 56
To Avoid Pull-in
:1. Be alert to forces or
situations that may cause material to pinch
the chain at the bottom of the bar.2. Always
start a cut with the chain rotating at full
speed.
52.
Pushback
: Pushback occurs when the
chain on the top of the bar is suddenly
stopped when it is pinched, caught or
encounters a foreign object in the wood.
The reaction of the chain may drive the saw
rapidly straight back toward the operator.
Pushback frequently occurs when the top of
the bar is used for cutting.
To Avoid Pushback
:
Be alert to forces or situations that may cause material to pinch the chain at
the top of the bar.
Do not cut more than one limb at a time.
Do not twist the bar when withdrawing it from an under buck cut because the
chain can pinch.
53. Keep the chain, bar and sprocket clean; replace worn sprockets or chains. Keep
the chain sharp. You can spot a dull chain when easy-to-cut wood becomes hard
to cut or burn marks appear on the wood. Keep chain at proper tension. Tighten
all nuts, bolts and screws except the carburetor adjustment screws after each use.
For maintenance items please also refer to the maintenance chart in this manual.
Do not clean your machine with a pressure washer. The solid jet of water may
damage parts of the machine. Store the power tool in a dry and high or locked
location out of reach of children. Before storing for longer than a few days, always
empty the fuel tank. See chapter "Storing the machine" in this manual. Store fuel
and chain oil in approved and properly labeled safety-type canisters only. Take
care when handling gasoline! Avoid direct contact with the skin and avoid inhaling
fuel vapor!
54.
Noise and Vibration
The running at low speed can reduce the noise and quiver.
In order to reduce noise, the pole saw should be operated at an open
environment.
The vibration can be lowered if the handle is grasped firmly.
In order to avoid disturbing others, the machine should be operated in
daytime.
Dress personal protective equipment, such as gloves and ear protection
during the operation.
The machine is not for professional work and not for long time operation.
In order to keep the user's fit and prolong the machine's life, please do not
work more than 2 hours in a whole day and don't keep working more than
10 minutes and often changing working positions.
