Pole Pruner/ Palm Harvester
KK-PP2-8627/ KK-PH2-215
: www.kisankraft.com
: +91.80.22178200
Page 10 of 56
22. Do not use the unit when you are tired, ill or under the influence of medication,
drugs or alcohol.
23. FOLLOW INSTRUCTION FOR CHANGING ACCESSORIES.
Do not store in a closed area where fuel vapors can reach an open flame
from hot water heaters, heaters, furnaces, etc. Store in a locked, well
ventilated area only.
Ensure safe and proper performance of your product. Use genuine spare
parts provided by our company.
The use of any other accessories or attachments may cause a potential
hazard or injury to the user, damage to the machine and void this warranty.
24. Clean the machine completely, especially, the fuel tank, its surroundings, and the
air cleaner.
25. When refueling, be sure to stop the engine and confirm that it is cooled down.
Never refuel when the engine is running or hot. When gasoline spills, be sure to
wipe it up completely and properly dispose of those materials before starting the
engine.
26. Whenever approaching an operator of the machine, carefully call his attention
and confirm that the operator stops the engine. Be careful not to distract the
operator which can cause an unsafe situation.
27. Pay attention to loosening and overheating of parts. If there is any abnormality of
the machine, stop operation immediately and check the machine carefully. If
necessary, have the machine serviced by an authorized dealer. Never continue
to operate a machine which may be malfunctioning.
28. In start-up or during operation of the engine, never touch hot parts such as the
muffler, the high voltage wire or the spark plug.
29. This power tool should be carried only in a horizontal position. Grip the shaft in a
manner that the machine is balanced horizontally. Keep the hot muffler away from
your body and the cutting attachment behind you. Accidental acceleration of the
engine can cause the chain to rotate and cause serious injuries.
30. Always switch off the engine and fit the
scabbard over the cutting attachment
before transporting the power tool over
long distances. When transporting it in a
vehicle, properly secure it to prevent
turnover, fuel spillage and damage to
the unit.
31. After the engine has stopped, the muffler is still hot. Never place the machine in
any places where there are flammable materials (dry grass, etc.), combustible
gases or combustible liquids.
32. Pay special attention to operation in the rain or just after the rain as the ground
may be slippery.
33. If you slip or fall to the ground or into a hole, release the throttle lever immediately.
34. Be careful not to drop the machine or hit it against obstacles.
35. Before proceeding to adjust or repair the machine, be sure to stop the engine and
detach the spark plug cap from the spark plug.
36. When the machine is placed in storage for a long time, drain fuel from the fuel
tank and carburetor, clean the parts, move the machine to a safe place and
confirm that the engine is cooled down.
