KIRLOSKAR i-HT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 50

IOM/i_HT Issue Date: 26/06/2009
Page 4 of 50
Last Revision:26/10/2009
1 . GENERAL
1.1 The booklet covers instructions for following types of i-HT pumps.
Single Stage
i -HT06BA i -HT12BA i -HT12EA
i -HT08BA i -HT12BD i -HT15BA
i -HT08BD i -HT12BE i -HT15BE
i -HT08BE i -HT12BF i -HT15DA
i -HT10BA i -HT12CA i -HT15DF
i -HT10BD i -HT12CF i -HT15DF
i -HT10BE i -HT12CG i -HT20DD
i -HT10DE i -HT12DA i -HT20DE
i -HT10ED i -HT12DF i -HT20ED
Double Stage
i -HT05AA i -HT06AA i -HT12XD
i -HT15XE i -HT15XF
1.2 These are horizontal split casing type pumps with suction and discharge nozzles and
their supporting feet integrally cast in the lower half casing. This construction enables to
remove the rotating unit for inspection and repairs by just removing upper half casing,
and without disturbing alignment, pipe connection or prime mover.
1.3 Pumps when properly installed and given due care in operation and maintenance
should operate satisfactorily for a long period.
1.4 When the pump is received, sometime before the actual use of pump, it should be
inspected and located in dry place. The coupling should be rotated periodically (once in a
month) to prevent pitting of bearing surfaces.
1.5 Generally all the i-HT pumps mentioned above are similar in construction with minor
changes of some parts.
1.6 Pump identification: All pumps are designated by serial number, model number, size
and type. This information is stamped on an identification plate which is fixed on the
pump.