KIRLOSKAR i-HT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 50

IOM/i_HT Issue Date: 26/06/2009
Page 23 of 50
Last Revision:26/10/2009
6. MAINTENANCE.
6.1
Maintenance EHS (Environmental Hazard Safety) Instructions
Following hazards may arise during maintenance work.
Fluid Pressure Jet Hazards
Check and ensure that the pump operates at below the maximum Working Pressure
specified.
Hazardous materials:
Wear a suitable mask or respirator when working with chemical material handling
.
Hazardous Gases, Mists, Sprays and Leaks.
Be aware of the hazards relating to the pumped fluid, especially the danger from
inhalation from noxious and toxic gases, skin and eye contact or penetration. Obtain
and understand the hazardous substance data sheets relating to the pumped fluid and
note the recommended emergency and first aid procedures.
Before attempting any maintenance on a pump, particularly if it has been handling any
form of hazardous liquid; ensure that the unit is safe to work on. The pump must be
flushed thoroughly with suitable cleanser to purge away any of the product left in the
pump components. The plant operator should carry this out and a certificate of
cleanliness obtained before starting work. To avoid any risk to health it is also
advisable to wear protective clothing as recommended by the site safety officer,
especially when removing old packing that may be contaminated.
Electric shock and accidental starting hazard: