background image

 Select the most applicable oil 

It is very important to select the applicable oil in order to keep up the 
performance and life of the generator set. If inferior oil is used, or if your oil is 
not replaced periodically, the risk of piston seizure, piston ring sticking and 
accelerated wear of the cylinder liner, bearing and other moving components 
will increase significantly. So the generator set life will be shortened. KIPOR 
recommends CC/CD oil classified by API. Choose the applicable viscosity oil 
according to the local ambient temperature.

3.3 Check the air cleaner

1.Screw off the wing nut, remove the air cleaner 
  cover and take out the element.

 
CAUTION:

 Do not wash the element with detergent.
 Replace the element when its output decrease 

     or a bad exhaust color is noticed.

 Never run the generator set without the elem-

    ent, otherwise the rapid engine wear will result.

2. Reattach the air clearer cover and screw on the 
   wing nut.

Air cleaner

Air cleaner cover

Element

WARNING

1. Drain out the fuel from the fuel tank.
2. Drain out the fuel from the fuel tank.
   Screw off the small screw of the fuel cock and pull out the filter from the filler 

port.

3. Wash the filter thoroughly with diesel fuel.
  Loosen the fastening nut, bottom cover and delivery discs for cleaning the  

deposit carbon.

8.5 Tighten cylinder head bolt

Tightening the cylinder head bolt requires a special tool. Do not try yourself. 
Contact with KIPOR agent.

8.6 Check the injection nozzle and fuel injection pump
1. Adjust the clearance of the intake/exhaust valves.
2. Grind the intake/exhaust valves.
3. Replace the piston ring

Do not perform the injection nozzle test near an open fire or any other kind of 

fire. The fuel spray may ignite. Do not expose bare skin to the fuel spray. The 
fuel may penetrate the skin and cause injury to the body. Always keep your 
body away from the nozzle.

8.7 Check and refill the battery electrolyte and charge the battery
The diesel uses a 12V battery. Battery electrolyte will be lost through continuous 
charging and discharging.
Before starting, check for physical damage to the battery and also the electrolyte 
levels, and refill the distilled water till to the upper lever if necessary. When actual 
damage is discovered, replace the battery.
Check the battery electrolyte monthly.

WARNING

The battery electrolyte contains sulfuric acid. Protect your eyes, skin and 

clothing. In case of contact, flush thoroughly with water and get prompt medical 
attention, especially if your eyes are affected.

The battery exhaust hydrogen gas, which can be highly explosive. Do not 

smoke or allow flames or sparks near the battery, especially during charging.

Содержание K DE12000E





















Отзывы: