background image

AC output receptacle

Ground terminal

Ground terminal

3.4 Check the generator set

1. Turn off the main switch and any other loads.

       WARNING:

Be sure to turn off the main switch before 
starting.

The generator set should be earthed to prevent 

electric shocks.

       WARNING:

The generator set should be earthed to prevent 

electric shocks.

2. Use dual voltage type generator sets

Be sure to place the changeover switch in the correct position for the rated 
voltage of the working instrument.

CAUTION:

Before starting the engine, be sure to turn the switches of the control panel 

(lighting apparatus, motor, etc.) to their "OFF" position. If the switches are not 
in the "OFF" position, the sudden application of load when the engine is started 
could be very dangerous.

CAUTION

Drain oil bolt

oil filter

Oil filter

Filter element

8.1 Replace engine oil
Remove the oil filler cap. Remove the drain 
plug and drain the old oil while the engine 
is still warm. The plug is located on the 
bottom of the cylinder block. Tighten the 
drain plug and refill with the recommended 
oil.

8.2 Clean the engine oil filter

Cleaning time

Replace if necessary

Every 6 months or 500 hours

Cleaning time Every 6 months or 500 hours

8.4 Clean and replace fuel oil filter
The fuel oil filter also has to be cleaned regularly to insure maximum engine output.

Never run the engine without the element or with a defective element.

Clean time 

Replace time 

Every 6 months or 500 hrs

Every year or 1000 hrs

Oil gauge

Содержание K DE12000E





















Отзывы: