Kioti CS2610 Скачать руководство пользователя страница 158

Страница: 158 / 170

Cs2610

Usage and disposal

in order to protect the environment,

use and dispose of the tractor keep-

ing the following in mind:
1. When changing the oil or coolant

by yourself, be careful not to spill

it. Dispose of used oil and coolant

properly according to the appli-

cable regulations.

2. never leave or discard the expired

tractor or implement without dis-

cretion on your own, but contact

your local

KioTi

Dealer to dispose

it according to the regulations.

3. avoid working under high load, as

it can cause excessive exhaust

gases, which is harmful to the en-

vironment.

10. start the engine, release the park-

ing brake, and check the brake

condition while driving forward. ad-

just the brake pedals if necessary.

11. stop the engine and check for

leakage. repair any part as re-

quired.



if the battery is not to be re-

moved, disconnect its nega-

tive terminal at least. The wir-

ing can be gnawed by rodents,

leading to a fire.

caUTion

M46-EU,AU-08.indd 4

2012-01-18 오후 6:40:22

Содержание CS2610











































































































































































Результаты поиска

Содержание CS2610

Отзывы:

Kioti CS2610, Руководство пользователя, Страница: 158 / 170

Результаты поиска

Содержание CS2610

Отзывы: