Kinoton FP 75 E Скачать руководство пользователя страница 12

Страница: 12 / 81

FP 75 E

Issue: 08/2012

1 .1 .3 Intended Purpose

The projector is suitable to reproduce film images and sound.
Any other or further use is not classified as an “intended purpose”. KINOTON cannot be

held liable for any damage resulting from different or extended operation.
As part of the “intended purpose” these tasks must be performed:

observing all instructions and warnings contained in this manual

inspecting the equipment for damage and correct function

implementation of maintenance and repair work.

1 .1 .4 Guarantee and Liability

By reference KINOTON’s “General Terms of Business” apply. They are available to the

customer on conclusion of sale at the latest.
Guarantee and liability claims for damage to persons and property are invalid if due to

one of the following causes:

improper use of the projector

improper assembly, commissioning, operating and maintenance of the projector

operation the projector with defective and / or non-functioning safety and protection

devices

activating the lamphouse via the rectifier and not via the projector

disregarding of the instructions in the manual concerning transportation, storage,

assembly, commissioning, operation and maintenance

modification of the projector without written authorisation from the manufacturer

connecting to power other than as specified

failure to monitor and/or replace parts subject to wear and tear

improper repairs

emergencies due to influence from outside bodies or force majeure.

1 .2

Explanations of Symbols and Notes

Throughout this manual you will find the following symbols:

DANGER

This symbol indicates an imminent threat of danger to life and personal health.

Disregarding this warning can result in serious personal injuries or highly dangerous

injuries.

ATTENTION

This symbol indicates a possibly dangerous situation. Disregarding this warning can

result in small personal injuries or damage to projector.

Содержание FP 75 E


















































































Результаты поиска

Содержание FP 75 E

Отзывы:

Похожие инструкции для FP 75 E

Бренды по названию

Популярные бренды

Kinoton FP 75 E, Руководство по эксплуатации

Результаты поиска

Содержание FP 75 E

Отзывы:

Похожие инструкции для FP 75 E

Бренды по названию

Популярные бренды