Kingsley KIP-20, Руководство по эксплуатации и обслуживанию

Страница: 3 / 42

3
SPECIFICATIONS:
Dimension W x H x D in inches (cm) …………………….. 7 X 14 X 15 (17.8 X 35.6 X 38.1)
Weight Net …………………………………………………………………………25 lb. (11.4 kg)
Electrical requirement 115 VAC 4 Amp. …………………………(230 VAC 3 Amp. optional)
Legend length in inches (cm.) …………………………………………………………..2.9 (7.4)
Type ………………………………………40 Character typewheels made of hardened steel
Speed ……………………………………………………………..Up to 350 imprint per minute
Dwell ………………………………………………………………..Adjustable (0.5 – 1 second)
Actuation ……………………………………………………………….Direct-acting air cylinder
Air supply requirement ………………………………………………………….100 psi at 5 cfm
Heater …………………………………………………..425 Watt, 15 VAC (230 VAC optional)
Marking foil ……………………………………100 foot (30.5 m) or 600 foot (183.0 m) length
Control …………On/OFF, Electronic dwell timer, Temperature controller, and Test mark
button
Indicators ……………………………...Power On, Temperature readout, Air pressure gauge
SCOPE OF MANUAL
This manual provides instructions for the installation, operation, periodic maintenance, and
troubleshooting of the KIP-20 Wire Marking Machine. It is intended to be used by operators
and plant maintenance personnel.
A list of recommended spare parts in located at the back of the manual. In order to
minimize downtime, Kingsley recommends that the suggested quantity of each part to be
kept on hand for each marking machine in service.
A complete parts list and exploded view of the marking machine is included as a guide for
ordering parts.