Kingsley KIP-20, Руководство по эксплуатации и обслуживанию

Страница: 2 / 42

2
INTRODUCTIOIN
GENERAL
The KIP-20 as shown in Figure 1 is a remote-operation wire-marking machine. It is
designed to work as a
SLAVE unit in an assembly process and mark on command from a
host signal. The machine provides permanent marking of alpha/numeric characters in
vertical and horizontal formats on insulated wire. It can be configured for continuous
incremental marking or simultaneous end marking.
The KIP-20 uses full-size-40-character typewheels to mark single or compound legends up
to 2.9 inches (7.4 cm.) in length. The machine can hold up to 28 typewheels. It is capable
of marking on insulated wires or cables from 0.038 inch (0.965 mm.) to 0.750 inch (19.05
mm.) outer diameter. It requires 115 VAC (230 VAC optional) electrical source and 100
psi. at 5 cfm. Compressed air source.
Figure 1 KIP-20 Wire Marking Machine