A Top Safety and Protection Solution In The Worldwide!
www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page
１１
of 30 Ver 1.1 File No.: S1000012
6.2.2.1 Add/Del RF Parts
Notice:
1) Zones’
Attribute
definition:
Zones’ Attribute
Definition
Normal
The sensors with this type triggered will alarm in Armed mode
and not alarm in disarmed mode.
Stay
In Stay mode, the sensors with Stay type triggered will alarm, the
sensors with Normal type triggered will not alarm.
24-Hour Zone
In any mode, the sensors with this type triggered will alarm.
Watchdog
In the starting time point and ending time point, the sensors
with this type triggered will not alarm, if the sensor hasn’t been
triggered, will make alarm.
SOS Help!
In any mode, the sensors with this type triggered will alarm but
not drive the siren.
Alarm Action: when Alarm occurrence, the system will Automatically dial the Pre-set
Auto-Dial Tel. Numbers for 3 times one by one, and Send SMS to the Pre-set SMS
Alert Numbers, in the meantime, will drive the siren for 60seconds and close the
1. Add/Del RF Parts
2.Basic Setting
3. Advanced Setting
1.Edit RF Zone
2.Edit Remote Ctrl
3. Remove All
---To add or remove wireless sensors or remote
controls and edit their attributes.
---To setup basic parameters of the system.
---To setup the advanced parameters of the
system.
---To setup the zone’s attribute and add new
wireless sensors to specificities zone.
---To add new remote controls.
---To remove all registered wireless sensors and
remote controls.
