A Top Safety and Protection Solution In The Worldwide!
www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page
１４
of 30 Ver 1.1 File No.: S1000012
Notice:
1)
The SMS Alert number is for receiving the alarm SMS Message. The Auto-Dial
Telephone number is for receiving the calling. Please help to try adding country code
or removing country code when you can not receive the call or SMS. Because of
different GSM Operator with different communication protocols. Our system is with the
international communications protocols.
2)
The Auto-dial Tel. Number can dial to the S100, 6 tones later, can wiretap the system
site. Before 6 tones, if somebody answers the calling, then can create two-way voice
communication. The other telephone number can call in the S100, if nobody answer
the calling, then can not wiretap the system site, if somebody answers the calling, then
can create two-way voice communication.
1.SMS Phone No.
2. Auto-dial Tel No.
3. Time & Date
4. Sound Alarm
5. Report Time Gap
6.
Power Failure Alert
7. Arm Delay Time
8. Alarm delay Time
---To setup the SMS Alert Number, must be cell
phone numbers, total 3.
---To setup the Auto-dial telephone number, total
is 5.
---To setup the time and date information. The
Format is Month-Date-Year. Press Up/Down to
setup each item, press * move to next item.
---Switch on or off the siren when
Alarm
occurrence
.
---Setup the Report time
gap
, Range:
0~240Hours.deflaut is 0, will not report.
---Enable or Disable the alert function while the AC
power is failure more than 30 minutes.
---Setup the delay time after armed the system by
remote control or keyboard.
Optional: 0S, 20S,
30S, 60S, 90S. Default is 30S.
---Setup the delay time after any sensor triggered.
Optional: 0S, 20S, 30S, 60S, 90S. Default is
20S
