A Top Safety and Protection Solution In The Worldwide!
www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page
２６
of 30 Ver 1.1 File No.: S1000012
a) One time can add only 1 wireless sensor;
b) The Name of the RF sensor can be modified by SMS commands. Please see
chapter 6.3.
9.4 Add Remote Controls to the Control unit:
Because of both of the S100 and its remote controls are with learning code,
you can add the remote control to the S100 directly following the 6.2.2.1
Add/Del RF Parts
a) Enter the Add/Del RF Parts menu;
b) Select
2. Edit Remote Ctrl
, then press
Enter
button,
c) then following the instruction:
1.Turn On the Device
, means
trigger the Remote Control, the system will show a code, then
press Enter Key
on the Keyboard. The system will ask you repeat
the operation, so please trigger Remote Control again, when you
see the Code, then press the Enter Button on the Keyboard, the
system will display
Saved OK
. It means the Remote Control added
to the system. Repeat this operation to add other remote controls.
Notice:
1) VVVV means this serial position saved one remote control already; you can learn a
new remote control to replace it.
9.5 Delete all wireless sensors and remote controls.
Go back to the menu, then select the Remove All, select it then the system
will alert
Are You Sure
Æ
Press Enter to remove all the RF Parts of the
system.
10. Technical specifications of Control Unit
Rated Voltage: 9~12VDC 1.5A Standby current:
30-40mA
Siren Output Voltage: 12VDC
Working temperature: -10
℃～
+60
℃
; Storage temperature:-20
℃～
+60
℃
Relative humidity: 10-90%, No condensation
Work frequency: 900/1800 MHz or 850/900/1800/1900MHz
