A Top Safety and Protection Solution In The Worldwide!
www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page
１６
of 30 Ver 1.1 File No.: S1000012
Notice:
1) The watchdog is special for elder or child or
on-duty personnel
, in the period (Starting
time point to Ending time point) if this sensor hasn’t been triggered, the system will
alarm. This is very useful to monitor the elder or child goes out the bedroom or enters
the kitchen to eat something. Or monitor the on-duty personnel in the polling period
have gone to on-site inspection.
2) If enable the RCO alert function, then when use any remote control which has been
registered to the system to arm or disarm or stay operation, the system will send SMS
to the first SMS number.
3) If enable the GSM Jammer Alert function, when the GSM Signal is 0 for more than 90s,
the system will drive the siren for 60seconds and the link-output relay will close 4
minutes.
6.3 Modify the SMS Alert Content of the Zone (Zone or Sensor Name)
The S100 accept SMS Command to modify the SMS Alert Content of the
zone. The format is:
P#+M+Zone Serial #+New Zone
Name+#
, the Max. Character for the zone name is 32. The Zone Serial
Number is 01~16 corresponding to the LCD Menu. If setup successful, the
system will return OK to confirm the operation.
1.Edit Timer
2. Watchdog Timer
3. RCO Alert
4. GSM Jammer Alert
5. Modify Password
6. Default Set
---To setup the starting time to arm and the Ending
time to disarm.
---To setup the starting and ending time to work.
---To setup the remote control operation report
function.
---To setup the GSM Jammer Alert function.
---Modify the system password.
---
Restore the system settings to factory defaults.
All of the remote controls and wireless sensors
should be re-assigned again.
