USER GUIDE
apexDRIVE User Guide 9200162 0v10
15
4.1.1.1 Installing the Trust mount Bracket
-
Bolt the half couplers to the truss mount bracket to suit the truss layout; refer to
Kinesys drawing 9200166 for layout of common truss types.
-
Position the truss mount bracket on top of the apexDRIVE and locate the four
DZUS fasteners onto the corresponding holes in the drive.
-
Turn each DZUS fastener one quarter turn clockwise
until a definite “Click” is
heard and felt. Verify that the bracket is secured with all four DZUS before
attempting to attach to the truss.
Figure 5 Locking DZUS fasteners
4.1.2 Safety Bond (Secondary support)
The truss mounting kit is supplied with a support. This shall be used to provide
secondary support for the drive when truss mounted. The safety bond shall be
passed around the supporting truss and clipped with the carabiner to the SAFETY
BOND tab at the rear of the product.
Figure 6 Safety bond
In the unlikely event of failure of the truss mounting or an operator omitting to
securely fix the truss mount or half couplers the safety bond will restrain the
apexDRIVE if it is dislodged.
Click!
