USER GUIDE
apexDRIVE User Guide 9200162 0v10
44
10 Recalibration of Touchscreen
The display touchscreen is calibrated during manufacture and, usually, should not
require recalibration.
However if the screen is replaced or it is found that, in use, icons do not respond
centrally to touch, then recalibration should be carried out.
IMPORTANT!
Before starting please confirm that the apexDRIVE is level and positioned
with the front panel text readable left to right as shown in Figure 41:
Figure 41 Correct orientation of apexDRIVE for screen calibration
1. Confirm key switch is in REMOTE position
2. Check e-stop is ON (button depressed)
3. Press UP and DOWN buttons together, button LEDs will light, hold down for next
step
4. Turn the key switch to LOCAL position, the display will now show the calibration
Screen (Figure 42):
Figure 42 Touchscreen calibration screen
5. Follow the calibration sequence; touching the screen where the three targets
indicate; try to be as accurate as possible to ensure good calibration.
6.
IMPORTANT!
Turn the key switch back to REMOTE to store settings and return
to the normal operational screens.
