USER GUIDE
apexDRIVE User Guide 9200162 0v10
10
1 Scope and Purpose
The purpose of this manual is to describe the features, functions and means of
operating the Kinesys apexDRIVE chain hoist controller.
2 Introduction
The apexDRIVE is a variable speed electric chain hoist controller designed for use
in the entertainment and events industry. It is designed exclusively for use with the
Kinesys apexHOIST range and ancillary equipment to form a complete motion
control system.
2.1 General Description & Safety Warnings
The equipment described in this manual may only be operated by personnel
qualified to do so for the specific task as detailed above.
Qualified personnel are those who, based on their training and experience, are
capable of identifying risks and avoiding potential hazards when working with this
and associated equipment.
The apexDRIVE is designed for indoor use only and to work in ambient
temperatures between 5C and 40C. The apexDRIVE has an Ingress Protection
(IP) rating of IP30.
2.1.1 D
o’s and Don’ts
Do not
start initial operations before a competent person or a trained
specialist has inspected the equipment.
Do not
run the system without all Emergency Stop switches/buttons
connected and in position.
Do not
use apexHOIST for moving loads other than in a vertical direction
Do not
connect an apexDRIVE to any lifting equipment other than
apexHOIST without prior written approval by the manufacturer
Do not
use any hoist without having carried out the regular inspection as
specified by the manufacturer
Do not
connect an apexDRIVE to a power source other than specified on
the unit and in this manual.
Do not
apply power if there is risk of condensation within the apexDRIVE
Do not
obstruct the air intakes or exhaust ports, or operate the unit with
contaminated filter media (Replace media following procedure on page 43)
Do not
modify an apexDRIVE in anyway unless expressly advised by the
manufacturer.
Do not
attempt to connect more than one hoist per controller.
