2.7
CONNECTION OF THE FLEXIBLE FLUE LINER (IF FITTED)
a)
If fitting with a 5” / 125mm flue liner, ensure the liner has been
connected and securely fixed at the top of the chimney in accordance
with the manufacturers instructions. Feed or align the flexible flue liner
through the hole in the top of the combustion chamber The flexible liner
should be then fitted to the 5” / 125mm spigot adaptor as shown below
in Fig. 14
Fig. 14
b)
Re-fit the 5” / 125mm flue spigot adaptor into the top of the combustion
chamber, and secure with the four M4 screws as shown below in Fig.
15.
Fig. 15
13
Fit flexible flue liner to
the 5” / 125mm spigot
adaptor via 3 off
retaining clips as
shown
Refit 4 off M4
Screws
