CONTENTS
PAGE
Section 1
Information and Requirements
1.0
Appliance information
3
1.1
Conditions of installation
4
1.2
Flue & Chimney Suitability
4
1.3
Shelf position
5
1.4
Hearths
5
1.5
Installation to plastered wall surfaces
5
Section 2
Installation of Fire
2.1
Unpacking the combustion chamber
6
2.2
Preparing the combustion chamber opening (In studded wall)
7
2.3
Preparing the combustion chamber opening (In chimney breast)
8-9
2.4
Fitting the mounting frame
10
2.5
Installation of the gas supply
11
2.6
Removal & re-fitting of the glass frame
12
2.8
Connection of the flue liner and fitting of the draught diverter
13-14
2.9
Fitting of the flue terminal and fitting of the draught diverter
15
Section 3
Assembling Fuel Bed and Commissioning
3.1
Fitting the fuel bed logset
16-20
3.2
Making the gas connection & checking for gas tightness
20
3.3
Lighting the appliance
21-23
3.4
Removal & re-fitting the trim
23
3.5
Checking for clearance of combustion products
24
Section 4
Maintenance
4.1
Removal of the burner assembly
25
4.2
Removal of the control valve
25-26
4.3
Removal of the ultrasonic reciever
26
4.4
Removal of the pilot assembly
26
4.5
Removal / Replacement of batteries in the Ultrasonic Receiver
27
4.6
Removal / Replacement of the handset battery
27
Model number KCFL**RN2
manufactured by:-
BFM Europe Ltd. Trentham Lakes, Stoke-on-Trent, Staffordshire, ST4 4TJ
Appliance Efficiency Declaration
The efficiency of this appliance has been measured as specified in
BS EN 7977-1 : 2002 and the result is 52%.
The gross calorific value of the fuel has been used for this efficiency calculation.
The test data from which it has been calculated has been certified by Advantica.
The efficiency value may be used in the UK Government’s Standard Assessment
Procedure (SAP) for energy rating of dwellings.
2
