12
Lighting the Appliance
1
Lighting:
See Figure 8.
a
Push in and turn control knob ‘A’ anti-clockwise to the PILOT position.
b
Hold knob ‘A’ in for several seconds to purge any air from the system.
c
With knob ‘A’ still depressed turn it from the "OFF" position to the "PILOT”
position until the pilot light ignites. Continue to depress the control knob
for a further 10-15 seconds. Release the control knob, the pilot should
stay alight. If the pilot flame goes out, repeat the process, holding down
the control knob for a slightly longer period.
d
Depress control knob ‘A’ slightly and turn anti-clockwise to the ON
position. The main burner will not operate until this is done. The main
burner may light depending on the position of Control Knob ‘B’.
e
Manual override for remote control
Turn Control Knob ‘B’ anti-clockwise to increase the flame height and
clockwise to decrease the flame height.
2
Extinguishing
a
Manual override for remote control
Turn Control Knob ‘B’ fully clockwise. This will turn off the main burner
leaving the pilot burner alight.
b
Turn Control Knob ‘B’ to the pilot position. This will also turn off the main
burner leaving the pilot burner alight.
c
To extinguish the pilot burner, turn Control Knob ‘B’ to the off position.
Figure 9
Figure 8
