background image

POWER PAK II / PLUS II

3

General Safety Warnings

Save all warnings and instructions for future reference.
WARNING! Read all safety warnings and all instructions.  
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 

Electrical Safety

1.  Charger plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs that are earthed 

(grounded). Unmodified plugs and matching outlets will reduce risk of electric shock.

2.  Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.  

There is an increased risk of electric shock if your body is earthed or grounded.

3.  Do not expose the POWER PAK II to rain or wet conditions. Water entering the POWER PAK II will increase the risk of 

electric shock.

4.  Do not abuse the cords. Never use the cord for carrying, pulling or unplugging the charger. Keep cord away from heat, 

oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

5.  If operating a charger in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an 

RCD reduces the risk of electric shock.

6.  Do not operate powered products in explosive atmospheres, such as in the presence of flammable liquids,  

gases or dust. Powered products create sparks which may ignite the dust or fumes.

7.  Keep children and bystanders away while operating any powered products. Distractions can lead to injury of yourself or 

the bystanders.

8.  When battery pack is not in use, keep it away from other metal object, like paper clips, coins, keys, nails, screws or 

other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals 
together may cause burns or a fire.

9.  This appliance is not intended for use by persons (including children) with reduced physical sensors or mental 

capabilities or lack of experience and knowledge, unless they have been given supervision or instructions concerning 
use of the appliance by a person responsible for their safety.

10.  Children should be supervised to ensure they do not play with the appliance.
11.  Always take care when using this appliance.

Additional Safety Instructions for Batteries and Chargers

1.  Do not modify or take the POWER PAK II apart, re-assemble, repair battery or charger to avoid breaking or damaging of 

the components.

2.  Do not place or allow the POWER PAK II to come into contact with water, fire or high-temperature environments.
3.  Do not puncture, damage or deform the POWER PAK II.
4.  Do not allow the + /- terminals of the battery to come in contact with each other. This could cause a short circuit  

of the battery.

5.  Do not store in locations where the temperature may exceed 60 °C.
6.  Charge only at ambient temperatures between -20 °C and 60 °C.
7.  Charge only using the charger provided with the product.
8.  Do not attempt to charge damaged batteries.
9.  Under abusive conditions, liquid may be ejected from the POWER PAK II; avoid contact. If contact accidentally occurs, 

flush with water. If liquid contacts eyes, flush with water and seek medical attention. Liquid ejected from the battery 
may cause irritation or burns.

10.  Use powered products only with specifically designated POWER PAK II. Use of any other battery packs may create a 

risk of injury and fire.

11.  Dispose of batteries in accordance with your local council regulations.

Содержание KP1405













Отзывы: