POWER PAK II / PLUS II
8
5. Charging your Electronic Devices (Phone, Tablet, iPod etc.)
1. Connect the Electronic Device Charging Cable (17) into the USB 5V DC 1A
or 2A Output Port (7 & 8).
2. Choose the correct electronic device adaptor located on the end of the
Electronic Device Charging Cable (17). Connect your chosen charging
device adaptor into the appropriate charging input of your electronic
device (fig 5).
3. Turn ON the POWER PAK II by pressing the ON / OFF / TEST Button (1).
Your device will begin charging. Once your device is fully charged remove
the charging adaptor or lead from your device and the POWER PAK II.
6. Charging your Laptop
Note: Ensure that the laptop is switched OFF and closed during the charging
process as sometimes the laptops current draw when in operation can trip
the 19V DC 3.5A Output Port (4) over current protection circuit.
Tripping the over current protection circuit will turn OFF the POWER PAK II
temporarily.
1. Connect the Multi Purpose Accessory Cable (16) into the 19V DC 3.5A
Output Port (4).
2. Choose the correct Laptop Charger Adaptor (15) from the choice of 8 available adaptors provided with your POWER PAK
II kit and plug the adaptor onto the end of the Multi Purpose Accessory Cable (16).
3. Connect your chosen charging adaptor into the appropriate charging input of your laptop (fig 6).
4. Turn the POWER PAK II ON by pressing the ON/OFF/TEST button (1). Your laptop will begin charging. Once your laptop is
charged remove the charging adaptor or lead from your laptop and the POWER PAK II.
Note: Depending on your laptop battery capacity the POWER PAK II may not fully charge your laptop.
Note: Please ensure your laptop charging current does not exceed the rated 3.5A. Please refer to your laptop power supply to
check and confirm wattage, voltage and current ratings are all correct before connecting the laptop to the POWER PAK
II for charging.
(fig 5)
(fig 6)
