Kimray GEN II, Руководство по ремонту

Страница: 10 / 22

STEP 5
Install Spring Clip. Insert back first then
use needle nose pliers to finish (Fig 1.9).
STEP 6
Insert Pivot Rod (Fig 1.10).
Make sure Pivot Rod moves freely & does
not bind Terminal Arm Assy.
Install Pivot Plate, be sure to use Loctite
on screws (Fig 1.11).
GEN II REPAIR MANUAL
Terminal Arm ASSEMBLY
Page 8
www.kimray.com
Figure 1.9
Figure 1.10 Figure 1.11
Loctite
Pivot Plate