Kimex 163-3235, Руководство пользователя

Страница: 10 / 43

English - 9 -
First Time Installation
When turned on for the first time, the language
selection screen will be displayed. Select the desired
language and press OK .
On the next screen, set your country preference and
press OK to continue.
You will be asked to set and confirm a PIN at this point.
For some country options, the PIN cannot be set to
0000
, in this case you need to enter another 4-digit
number combination. You have to enter this PIN if you
are asked to enter a PIN for any menu operation later.
The
Signage Settings menu will be displayed next.
Set ID , Auto Software Update options can be
configured using this menu. Model name , Serial
number and Software version options are for
information only. They will be grayed out and not
selectable. You can save the model information data
of the Display to a connected USB device using the
Save model information option. You can also copy
database files from a connected USB device to the
Display using the
Clone from USB
option. Refer to
the Signage Settings Menu Contents section for
more information on the options of this menu. After
the settings are completed, highlight Next and press
OK to continue.
If the ERP Regulations 2021 are applied (depends
on the model of the unit):
The following step will
be available
The Display Operation Mode selection screen will be
displayed next. For normal operation set the Power
Mode option to Reactive . Set to Eco for an energy-
efficient operation. In this mode your Display’s settings
will be configured to reduce the energy consumption.
On the next screen, the
Network/Internet Settings
menu will be displayed. Please refer to Connectivity
section to configure a wired or a wireless connection.
If you want your Display to consume less power
in standby mode, you can disable the Networked
Standby Mode option by setting it as Off . After the
settings are completed highlight Next and press OK
button to continue.
The First Time Installation is completed.
To repeat this process and reset the Display's settings
to the factory defaults enter the Settings>Signage
menu, highlight First time installation and press
OK . A confirmation message will be displayed asking
whether you want to delete all settings and reset the
Display. Select
Yes
and press
OK
to confirm.
Note: Do not turn off the Display while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
Using Main Display Menu
When the Menu button is pressed, the main Display
menu will appear at the bottom of the screen. You can
navigate through the menu items using the directional
buttons on the remote. To select an item or see the
sub-menu options of the highlighted menu press OK
button. When you highlight a menu option some of
the sub-menu items of this menu may appear on the
upper side of the menu bar for quick access. To use
a quick access item highlight it, press OK and set as
desired using the Left/Right directional buttons. When
finished press OK or Back/Return button to exit.
Press Exit button to close the main menu.
1. Home
When main menu is opened Home menu bar will
be highlighted. The content of the Home menu can
be customised by adding options from other menus.
Just highlight an option and press the Down direction
button on the remote. If you see Add to Home option
you can add it to the Home menu. Same way you
can delete or change the position of any item in the
Home menu. Press the Down direction button and
select Delete or Move option and press OK . In order
to move a menu item use the Right and Left direction
buttons to select the position that you want the item
to move to and press OK .
2. Settings
You can manage the settings of your Display using
the options of this menu. Refer to Settings Menu
Contents section for more information.
3. Apps
When your Display is connected to the Internet related
contents will also be available, including Apps related
contents. Using the Apps menu you can access
your applications. Refer to Apps section for more
information.
4. Sources
You can manage your input source references using
the options of this menu. To change the current source
highlight one of the options and press OK .
4.1. Source Settings
Edit the names, enable or disable selected source
options. There will be
Regular
,
Enhanced
and
Disabled options available for HDMI source(s),
if your Display supports Ultra HD. Regular and
Enhanced options are affecting the colour settings
of the HDMI source. To be able to watch 4K or HDR/
HLG images from the HDMI source its source setting
should be set as Enhanced if the connected device is
compatible with HDMI 2.0 and subsequent versions.
Set as Regular if the connected device is HDMI 1.4
compatible. Set accordingly or disable the HDMI
source by setting as
Disabled
.
You can reset your customizations on the Home