Kimex 163-3235, Руководство пользователя

Страница: 15 / 43

English - 14 -
Signage Menu Contents
Device Info
Set ID
Sets the device ID. You can select a value between 0-99 using the numeric buttons
on the remote in order to identify your Display.
Software version Displays current software version.
Serial number
Displays serial number of the unit. (Cannot changed by user)
Model name
Displays model name of the unit. (Cannot changed by user)
Save model
information
Copies the model information data of the unit to a connected USB device.
Display Life Time Displays the duration of life of the unit.
Controls
PIXEL shift
Enables or disables pixel shifting. This option can be used to avoid image retention
(after image effects) that can occur when displaying fixed patterns or still images for
long periods of time. If enabled, the picture and OSD (On-Screen Display) will be shifted
at specified time intervals.
No Signal
Sets the behavior preference of the Display, when no signal is detected from the currently
set input source. Failover options are available.
If Failover is selected the Display checks the connected USB device for available
files to play. If no playable files are available or there is no USB device connected to
the Display, the No Signal image will be displayed. If there isn’t any No Signal Image
available, No Signal OSD will be displayed on the screen. The setting of the USB Auto
Play option in the Settings>System>More menu is not important, in Failover mode it
will function anyway.
(*) If the ERP Regulations 2021 are applied (depends on the model of the unit): The Display will turn
itself off after a specified period of time (defined in No Signal Timer option)
No Signal Delay
Sets a delay value to the ‘No Signal’ preferences when the Display is in No Signal state.
After the set delay time is expired ‘No Signal’ preferences will be applied.
No signal Power
off
When enabled the Display will turn itself off after a period of 5 minutes (*) , if no signal
is received from the selected source.
(*) If the ERP Regulations 2021 are applied (depends on the model of the unit): The Display will turn
itself off after a specified period of time (defined in No Signal Timer option)
This feature will only work if all of the following circumstances occur:
- No Signal option is set as Failover .
- USB device is not connected to the Display / USB device is connected but there are
no playable files installed on the USB device.
No Signal Timer
(*)
You can define a shut-off timer for the Display using this option. When the Display is in
No Signal state and No Signal OSD is displayed on the screen, it will go into standby
mode after the time set here has expired.
(*) If the ERP Regulations 2021 are applied (depends on the model of the unit): This option will be available
Panel Lock
Set as
Off
to prohibit the use of the buttons on the Display.
RCU Inhibit
Set as On to inhibit the use of the remote. Remote control will function in standby mode
independently from the setting of this option.
To turn this option off and be able to use the remote again, press MENU/M-1-9-7-3
buttons on the remote consecutively. Signage menu will appear. Enter the Controls
menu and set this option as Off .