Kimex 163-3235, Руководство пользователя

Страница: 8 / 43

English - 7 -
Control Buttons on the Display
To turn on the Display: Press the centre of
the joystick in and hold it down for a few
seconds, the Display will turn on.
To turn the Display off: Press the centre
of the joystick in and hold it down for a few
seconds, the Display will turn into standby
mode.
To change source:
Press the centre of the
joystick in, the sources list will appear on the
screen. Scroll through the available sources
by pushing the joystick up or down.
To change volume: Increase the volume
by pushing the joystick right. Decrease the
volume by pushing the joystick left.
Note: Main menu OSD cannot be displayed via
joystick.
Turning the Display On/O ff
After connecting the Display to the mains set the main On/Off switch to the “1” position. The Display will switch
into standby mode. Press the Standby button on the remote or press the centre of the joystick in located on
the rear left side of the Display and hold it down for a few seconds to switch it on from standby.
Press the centre of the joystick in and hold it down for a few seconds or press the Standby button on the remote
to switch the Display into standby mode. To switch the Display off, set the On/Off switch to the “2” position.
2
3
1
Standby button
2
Joystick
3
On/Off Switch (*)
(*) The location of the On/Off switch may differ depending on the model.
LED Status Status of the monitor
Power LED not lit Power on
Power LED lit Power off (Standby mode)
Power LED flashing (slow) Scheduler active (optional)
Power LED flashing (fast) Software update