Kimex 163-3235, Руководство пользователя

Страница: 5 / 43

English - 4 -
Foreseeable misuse and incorrect use
• For apparatus intended to be used in vehicles, ships
or aircraft or at altitudes exceeding 5000m above sea
level, for outdoor use or in general for the application
other than mentioned in user manual additional
requirements may be necessary.
CAUTION
Do not leave a static image displayed for pro-
longed period of time. If a static image is displayed
continuously for a long period of time, that image
may cause image sticking on the display. This con-
dition is not permanent, but may require a consid -
erable amount of operational display time to dissi-
pate, depending upon the degree of image stick.
120 minutes of continuous motion display will elim-
inate most image sticking effects at normal room
temperature (not lower than 10 C).
As the nature of the TFT technology, you may see
some amount of bright, dark, red, green and blue
dots and sparklings on the screen, those do not af -
fect the performance of the computer and are not
accepted as a defect.
Warning
This is a class A. In a domestic environment this may
cause radio interference in which case the user may
be required to take adequate measures.
BATTERY SAFETY GUIDELINES
Used correctly, domestic batteries are a safe and
dependable source of portable power. Problems
can occur if they are misused or abused resulting in
leakage or, in extreme cases, fire or explosion.
Here are some simple guidelines to safe battery use
designed to eliminate any such problems.
• Take care to fit your batteries correctly, observing the
plus and minus marks on the battery and appliance.
Incorrect fitting can cause leakage or, in extreme
cases, fire or even an explosion.
• Replace the whole set of batteries at one time, taking
care not to mix old and new batteries or batteries of
different types, since this can result in leakage or, in
extreme cases, fire or even an explosion.
• Store unused batteries in their packaging and away
from metal objects which may cause a short-circuit
resulting in leakage or, in extreme cases, fire or
even an explosion.
• Remove dead batteries from equipment and all
batteries from equipment you know you are not going
monitor where it cannot be pushed, pulled over, or
knocked down.
• Care should be taken to route all cords and cables
connected to the monitor so that they cannot be
pulled or grabbed by curious children.
Connections
Be sure to turn off the main power switch and
disconnect the plug from the power outlet before
connecting/disconnecting cables. Also, read the
manual of the equipment to be connected.
Be careful not to confuse the input terminal with the
output terminal when connecting cables. Accidentally
reversing cables connected to the input and output
terminals may cause malfunctions and other
problems.
Positioning
If a monitor is positioned in an unstable or inclined
location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided
by taking simple pre-cautions such as:
• Using fixing devices like wall mount brackets
recommended or supplied by the manufacturer.
• Educating children about the dangers of climbing on
furniture to reach the monitor or its controls. If your
existing product is being retained and relocated, the
same considerations as above should be applied
Transport and Shipping
• Your device must be kept in its original package
to protect from damage to its accessories during
transport and shipping.
• Keep the product in normal position during transport.
• Do not drop the device during transport and protect
it against impacts.
• Damages and faults that occur during transport after
the delivery of the appliance to the customer are not
included in the warranty cover.
• Product transportation, installation, repair and
servicing must be done by qualified technical service
personnel.
Intended Use
• This product is intended to be used in public places
such as schools, offices, theatres, places of worship.
• Product is only suitable for connecting commercial
mains socket outlets. Do not connect product
industrial socket outlets.