Casegoods Assembly Instructions
Transcend
Printed in U.S.A.
© 2007 Kimball Inter
national, Inc.
T 800.482.1818
F 812.482.8300
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 1998776 Revision A-07
Page 2 of 2
Installation
5. Drill the appropriate diameter hole in the Hanger Rail per
the fastener manufacturer’s guidelines,
3
⁄
8
" above the bottom
edge of the rail at the locations marked in Step 4. (Figure C).
Note: Hole sizes are dependent on the size of the fastener
selected.
Figure C
Figure D
Cut rail 2"
shorter than
overhead
Centerline of
stud/fastener
Bore through
this side
Level line
from
Step 1
Centerline
of stud
Figure E
Hanger Bracket
Hanger Rail
Overhead
Recommended Fastener
Size
Model No.
Steel Stud (for
1
⁄
2
" to
3
⁄
4
" drywall):
Hilti Toggler anchor toggle bolt
1
⁄
4
"-20 x 2"
374494
Grade 5 or
equivalent
with maximum
head height
of .134"
Wood Stud (for
1
⁄
4
" to
1
⁄
2
" drywall;
meets or exceeds ANSI/ASME
B18.6.4 and SAE J933):
Panhead sheet metal screw
10-2 PHPMS
Solid Masonry:
Crown Bolt lag shields
1
⁄
4
" x 1
1
⁄
2
"
Buildex Tapcon concrete
1
⁄
4
" x 2
3
⁄
4
"
anchor screw
Masonry Block:
Hilti Toggler anchor toggle bolt
1
⁄
4
"-20 x 2"
374494
Grade 5 or
equivalent
with maximum
head height
of .134"
Crown Bolt lag shields
1
⁄
4
" x 1
1
⁄
2
"
Buildex Tapcon concrete
1
⁄
4
" x 2
3
⁄
4
"
anchor screw
6. Attach Hanger Rail to wall aligning bottom edge of rail
with level line drawn in Step 1. Ensure that each fastener is
securely attached to wall substructure. (Figure D).
7. Place overhead cabinet flush against the wall so that the
hanger brackets attached to the overhead are above the wall
Hanger Rail and is between the end panels of the overhead.
Carefully lower the overhead cabinet until the cabinet
hanger brackets engage the wall Hanger Rail. Make sure
the cabinet hanger brackets are firmly seated on the wall
Hanger Rail. (Figure E).
Fastener
(not supplied)
3
⁄
8
"
