Kimball Office Transcend Master Packet Complete Series, Руководство по сборке

Страница: 17 / 18

Casegoods Assembly Instructions
Transcend ™
Printed in U.S.A.
© 2007 Kimball Inter
national, Inc.
T 800.482.1818
F 812.482.8300
Page 1 of 1
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 1998789 Revision A-07
Traxx ® Mounted Overhead
Tools Required
■
None
Installation
1. Overhead cabinets can be hung from Traxx using the
Traxx attachment bracket. (Figure A).
2. Insert the hook on top of the bracket into the Traxx at
a 15˚ angle. (Figure B).
3. Pull downward on bracket allowing bracket to hang off the
Traxx. Install the remaining brackets required to hang the
overhead. 30", 36", 42" and 48" cabinets require two
brackets. 60", 66", and 72" cabinets require 4 brackets.
(Figure C).
4. Install the overhead by tilting the bottom of the cabinet
approximately 15˚ away from the wall and engaging the
cabinet bracket onto the Traxx attachment bracket located
on the Traxx. (Figure D).
5. Let the cabinet rest against the spacer block or tiles.
Repeat procedure for any additional overhead cabinets.
6. To level the cabinets, loosen the screws on the cabinet
bracket and adjust accordingly. Tighten all screws after
leveling.
Figure A
Figure B
Figure C
Figure D
Traxx Attachment
Bracket
Cabinet
Bracket
Traxx
15°