Assembly Instructions
Transcend
™
P
ri
n
te
d
in
U
.S
.A
.
©
2
0
1
0
K
im
b
a
ll
In
te
rn
a
ti
o
n
a
l,
In
c
.
T
8
0
0
.4
8
2
.1
8
1
8
F
8
1
2
.4
8
2
.8
3
0
0
Page 1 of 1
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 1998783 Revision B-10
Leveling
Tools Required
■
⁷⁄₃₂
" Nut Driver
■
Level
Installation
Note:
All floor units
MUST
be leveled as described below
for appearance and proper function of doors and drawers.
1.
Desk, Credenza, Return, Lateral File, Drawer Storage:
Remove all drawers as required for access to leveling glide
adjustment holes.
Note:
To remove drawers, refer to the Pedestal Drawer
Removal Assembly Instruction sheet or the Lateral File Drawer
Removal Assembly Instruction sheet.
Turn the glides fully “in” (counterclockwise) prior to
leveling. Level the unit from front to back by first extending
the glides on the outside corners (turn clockwise), then level
the unit from side to side. Check adjustments by placing the
level in the four positions shown. Adjust inside glides if
applicable, to help support the desk/credenza. (Figure A).
2.
Bookcase, Cabinet Storage:
The lower shelf has holes which access the leveling glides.
Turn the glides fully “in” (counterclockwise) prior to
leveling. Level the unit from front to back by extending the
glides (turn clockwise). Level the unit from side to side.
Check adjustments by placing the level in the four positions
shown. (Figure B).
Figure A
Figure B
⁷⁄₃₂
" Nut
Driver
Level; check
four positions
Leveling Glides
Level; check
four positions
Leveling glide
adjustment hole
⁷⁄₃₂
" nut driver
