Kimball Office Transcend Master Packet Complete Series, Руководство по сборке

Страница: 9 / 18

Casegoods Assembly Instructions
Transcend ™
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 1998781 Revision A-07
Page 1 of 1
Hinge Adjustment
Tools Required
■
Phillips Screwdriver
Installation
1. Side Adjustment:
Turn front screw clockwise to increase door overlay,
counterclockwise to decrease overlay. (Figure A).
2. Depth Adjustment:
Loosen back screw. Adjust door to desired position and
tighten screw. (Figure B).
3. Height Adjustment:
Loosen screws on the mounting plate. Adjust door to
desired position and tighten screws. (Figure C).
4. Door Removal and Installation:
Release lever under the hinge arm, pull to remove.
To re-install, place the hinge on the mounting plate and
push the rear of the hinge with finger pressure. The snap
sound confirms a secure attachment. (Figure D).
Figure B
Figure C
Figure D Figure A
Printed in U.S.A.
© 2007 Kimball Inter
national, Inc.
T 800.482.1818
F 812.482.8300
Side Adjustment
Depth Adjustment
Removal
Height Adjustment