Sirius Capacitor Module
–
User Manual
Model Number -7100-48-B-2C-M-SD-A-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
18
Step 2: Module Start-Up:
1.
Turn
ON
the Circuit breaker by pushing the Blue buttons upwards as shown in the picture below:
2.
The picture below shows that the Module is turned
ON
.
3.
Wait till the LCD screen on the Module displays initial values.
4.
Be sure you are able to see the terminal status LED
OFF
.
5.
Press and hold the fault reset button, after 3 seconds the terminal status LED will change to Green.
6.
Release the fault reset button.
Note!
Use the Bypass circuit breaker button to connect the Modules in Series
and for recovery purpose.
Note!
Due to shipping laws and regulations, the Module may be shipped in
partial State of Charge.
