Operation Manual Page 16
Use
“UP ARROW”
and
“DOWN ARROW”
to increase and decrease the
flashing digit, use
“LEFT ARROW”
and
“RIGHT ARROW”
to move the digit
on the right or the left. When setting desired memory position, press
“
ENTER”
to confirm it. Scale from now will be programmed with the set
piece counting memory.
You can start piece counting by placing pieces on the platter or in a recipient
if we use tare function.
7.8 Weight limit function (+/-) (HI/LO)
This function is suitable to classify a list of products by weight, ruling out
those that are under or on the desired min or max weight.
Scale shows a bar with negative left extreme, and positive right extreme,
and in the center the accepted products.
This figure indicates if each product is in the desired range set. It uses a
beep as acoustic signaling. We offer a relay card to connect external Hi/Lo
or control devices.
Scale has 20 memories available for this function.
7.9 Weight limit saving and reply mode.
1) Press
“PLU”.
Scale will show
“PLUPro”. Press
“ENTER”
to confirm,
and display will show at right the function memory position number.
