Operation Manual Page 12
4.
To weight again, repeat the same operation. You can use it indefinitely
without pressing any button.
7.4 Current weighting
Switch on the scale pressing
“ON/OFF”
button.
Display will be on in a few seconds, afterwards it will show zero value.
If there is any object on the platter, display will show the object weight,
except in the case its weight is very low, then scale will display zero.
Press
“U”
to select desired weighting unit (default unit is “g or kg”,
depending on its configuration).
Place the object you desire to weight on the platter. Screen will indicate
object weight value, it should be read when
“stable”
symbol is shown at the
top left side on the display.
7.5 Accumulative weighting
This function adds up all weighting values accumulated, and shows its total
value.
To use it, place the object you desire to weight on the platter. When display
show stabilized weight value (stable symbol on), press
“RIGHT ARROW”
.
Then, weight value adds to total.
