Operation Manual Page 19
2- One-time
“BEEP”
3- One continuous
“BEEEEEEP”.
Press
“ENTER”
to confirm introduced data, escape using
“U”.
Scale returns to normal use mode
Limit function acti/-)
1) Press and hold
“G/N”
still it shows “Hi-Lo X”, where “X” indicates if
function is enabled or unabled.
To enable, use
“UP ARROW”
and
“DOWN ARROW”
, select one out of
the two following options.
0- Limit function unabled.
1- Limit function enabled.
2) Press
“
ENTER
”
to confirm. Display will show
“
PLU XX
”
where XX is
the memory position.
3) Select one of the positions, use
“UP ARROW”
and
“DOWN ARROW”
to
modify the flashing value, and also
“LEFT ARROW”
and
“RIGHT
ARROW”
3) Confirm the selection with
“
ENTER
”
,
and press
“
LEFT ARROW
”
to
